How do I fix error code E It on my LG LF29H8330B?

1. undefined: Enter Test Mode to confirm ice maker motor operation (press Fill key for 3 seconds). 2. undefined: Check that the icemaker runs through harvest and fill water stages step by step. 3. undefined: If motor does not run, check wiring harness connector between ice maker and PCB for looseness. 4. undefined: Disconnect power and measure BLDC motor resistance at CON1 (U-V, V-W, W-U). Expected: 2.37–2.73 Ω each phase. 5. undefined: If motor resistance is out of range, replace the icemaker assembly. 6. undefined: If motor resistance is correct but motor still does not run, check for correct drive voltage at Sub PCB CON1 and replace Sub PCB if needed.

LG LF29H8330BRefrigerator

Error Code E It

Ice Maker Kit Malfunction

Moderate

Address soon - your appliance may not work properly

How to Fix

1
Enter Test Mode to confirm ice maker motor operation (press Fill key for 3 seconds).
2
Check that the icemaker runs through harvest and fill water stages step by step.
3
If motor does not run, check wiring harness connector between ice maker and PCB for looseness.
4
Disconnect power and measure BLDC motor resistance at CON1 (U-V, V-W, W-U). Expected: 2.37–2.73 Ω each phase.
5
If motor resistance is out of range, replace the icemaker assembly.
6
If motor resistance is correct but motor still does not run, check for correct drive voltage at Sub PCB CON1 and replace Sub PCB if needed.